LDPE 2420E02
اطلاعات بیشتری درباره این محصول در ادامه مطالعه نمایید
مشخصات محصول :
- برند: OKAM
- کاربرد: Cast, fine shrink and high clarity films.
توضیحات :
LDPE 2420E02 is a low density density polyethylene. It is a homo polymer with high clarity suitable for
usage in cast, fine shrink and high clarity films
LDPE 2420E02 is a low density density polyethylene. It is a homo polymer with high clarity suitable for
usage in cast, fine shrink and high clarity films | Introduction |
Film Industry | Industry |
Cast, fine shrink and high clarity films | Application |
Good Heat Seal, Optical, Good Processability | Advantages |
Antioxidant: Yes Antiblock : No Slip Agent : No | Remark |
The possibility of compounding according to your order or our suggested formulation, with the
following different items: • Different polymers • Different additives • Different fillers
| Remark |
Polyethylene resins are supplied in pellet form packed in 25kg bags on 1.375 kg pallets | Storage |
Ensure proper ventilation of the work environment to minimize health and safety hazards from fine
particles. Ensure machinery and equipment is properly grounded to prevent sparks that can ignite
dust. Molten polymers will cause thermal injuries to organic matter, please ensure safety glasses and
appropriate safety apparel is worn | Recommendation |
Supplied in pellet form and can be packaged in 25kg bags, 1 ton semi bulk or 17 ton bulk. | Packaging |
Store in dry and dust-free conditions* Temperature should not exceed 50°C* Protected from direct sunlight* It is also advisable to process polyethylene resins (in pelletized or powder from) within 6 months after delivery* | Storage |
Typical Properties
Test Method | Unit | Typical Value | |
Physical | |||
ISO 1133 | gr/10min | 1.9±0.02 | MFI (190 °C /2.16 Kg) |
ISO 1183 (A) | gr/ml | 0.923±0.002 | Density |
Mechanical
ASTM D4272 | kJ/m | 26 | Impact Strength |
ISO 6383-2 | kN/m | 25 | Tear Strength (TD) |
ISO 6383-2 | kN/m | 60 | Tear Strength (MD) |
ISO 527-1,3 | MPa | 11 | Yield Stress (TD) |
ISO 527-1,3 | MPa | 13 | Yield Stress (MD) |
ISO 527-1,3 | % | 500< | Strain at Break (TD) |
ISO 527-1,3 | % | 200< | Strain at Break (MD) |
ASTM D1894 | - | 1 | Coefficient of Friction |
Optical
ASTM D1003 A | % | 9 | Haze |
ASTM D2457 | % | 55 | Gloss (45°) |
ASTM 1709 | g | 120< | Dart drop impact |
Internal | No./m2 | 3≤ | Fish eye |
محصول مرتبط